How to program a key fob (passive keyless entry) for a 1996 c4 corvette? - how to program c4 fob
How to Make a Keychain program (Passive Keyless Entry) of the 1996 Corvette C4?
PKE instructions to be able to program?
Sunday, January 31, 2010
How To Program C4 Fob How To Program A Key Fob (passive Keyless Entry) For A 1996 C4 Corvette?
1 comment:
1. They all keyless remotes are not in the vehicle moving. (10 to 15 feet)
2. Turn the key position.
3. Press the TRIP / ODO button on the DIC (Driver Information Center) twice.
4. In 5 seconds press and hold the FUEL INFO button until the DIC
PKE light comes on and stays on.
5. Turn on the ignition, but leave the key in the ignition.
The PKE light starts blinking.
6. Bring a keyless remote to reach to win. The PKE flashing LED stops
and remain on display for the code is stored. Move the keyboard with remote control
Range. The PKE light starts to blink, indicating that the system is ready
for the next remote keyless entry.
7. If more than one keyless remote is programmed, the first sentence
Remote out of range and repeat step 6 for other keyless
Remotes. Up to three remote keyless entry are programmed inspections.
8. To disable the programming, just remove the ignition key
ture orn in the power switch.
9. The programming mode turns off after two minutes, yes.
A) Make no keyless remote.
B subtract) the ignition key.
C) were scheduled after three remote keyless.
This keychain corvette.Best 1996 Instructions for happiness.
Post a Comment